Bathtub clogging is something that all homeowners can experience. This article in particular explains how to unclog a bathtub full of water using a plunger – an easy and safe way to clear any drain clogs. Discover diy concrete pool.
Bathtubs are really handy when you have a family, but they can also be a pain in the ass. If you’re trying to get in and out without spilling water all over the floor or getting soaked, you might be tempted to drain all the water out of the tub and start fresh. Don’t do this! Instead, follow these steps to unclog your bathtub instead; it could save you an even bigger headache later on.
What should you do when water is overflowing out of your bathtub?
If you have a bathtub that is overflowing, the most common thing to do is to call a professional plumber. However, there are some things that you can do yourself in order to try and unclog the bathtub yourself. One of the first things you should do is to turn off the water supply to the bathroom and wait 15 minutes. This will give the water a chance to settle and hopefully reduce the amount of water flowing out of the bathtub. If after 15 minutes the water still continues to overflow, you may need to call a professional plumber. Get info about elephant decor.
How to Unclog A Bathtub Full Of Water
Getting your bathtub drained can be a frustrating task, but it’s not impossible. Follow these tips and you’ll be unclogging bathtubs in no time!
1. Clear the drain by using a plunger. Make sure the suction is strong enough to pull the water and debris down the drain. If the plunger isn’t able to clear the drain, try using a bucket or another container as an extension of the plunger’s tube.
2. Use a auger to break up large clumps of material in the drain. Again, make sure that the suction is strong enough to dislodge all of the gunk. If necessary, use a wire brush on an extension to reach further down into the drain.
3. Pour a pot of boiling water onto the plugged bathtub drain to create heat and expand the rubber gasket around the pipe. This should break up any clogs and help push debris down the drain.
4. Pour a pot of cold water onto the plugged bathtub drain to create icy coldness and shrinkage of any debris that has been dislodged by step. Find out germinating seeds in paper towel.
What if it’s not just a bathtub full of water?
If your drain is overflowing and the water is coming up through the floor, it’s time to call a professional. Here are four common causes of water coming up through the floor:
– A clogged drain – This is by far the most common cause of water coming up through the floor. If you don’t have a plunger, try using a bucket or plunger tube. If that doesn’t work, call a professional.
– Overflowing sink – If your sink is constantly overflowing, there may be something blocking the drain. Check to see if there’s anything in the pipe that could be blocking the flow, like a hairball or build-up of soap. If there is nothing blocking the pipe, try unplugging and cleaning out the sink drain.
– Leaky faucet – If you’re noticing drips from your faucet, there may be something wrong with it. Try tightening the faucet or replacing it. If that doesn’t work, call a professional.
– Water main break – This is by far the worst type of water main break. Calling a professional right away will help prevent any damage to your home and valuable belongings. Look at the ceiling decorations.
Conclusion
If you find yourself struggling to unclog a bathtub full of water, there are a few things that you can do in order to get the job done. One option is to pour some boiling water into the bathtub and wait for it to cool down before trying to unclog it with your hands. Another option is to use a plunger. If neither of these methods work, you might need to call an experienced plumbing technician in order to help you out.
About Author
