Some colors require very specific elaborations to make them, especially if you want to get all the shades they offer. Despite having a base mix, it is necessary to play with the distribution of quantities and the inclusion of some extra colors to obtain each differentiated tone. The pink case is one of them: it has a common starting point, but at the same time, it has a wide range of tones that require new mixtures.
Pink can be obtained in different ways, depending on the paint you are going to use. Therefore, in addition to having a variety of tones, there are also different methods to make it. If you want to know how to make a pink color, delve into each painting’s methods to get it and the nuances that this color offers, keep reading!
How to make pink with tempera step by step
Pink is one of the light colors present in the color wheel. To do this, two paints are basically needed: red and white. Follow these steps to discover how to make pink with tempera:
- Mix magenta and yellow to get red if you don’t have this color.
- In a container, add 4 drops of red paint and one of white paint to start lightening the color.
- Combining both tones with a brush, the color will turn pink.
Depending on the pink shade you want, you can add white paint to get a light pink.
In the case of corrections, add a little red. Still, it will always be easier to lighten the color, so you will have to be especially careful if you add red paint again.
How to make pink color with watercolors step by step
The pink color can also be done with watercolors. You must have water in addition to the paints, the brush and the palette or container in which you will make the mixtures. To achieve this, follow these steps:
- Dip the brush into the container with water. Try to press to the bottom of the container so that the bristles open.
- To remove some of the water before mixing the paints, clean the brush with the edge of the container.
- On the surface where you are going to make the mixture, add white and red paint separately if it is wet watercolors. If they are dry, apply a base of red paint to add the white later.
- Take the red paint with the brush and dip it again in water.
- Repeat the previous step with the white paint.
- The resulting color will be pink. To get other shades of this color, you will need to add new colors.
To know how to make pink without white, you can use water to dilute the red until you achieve a standard pink. That is a rose that does not derive to specific pink colors such as fuchsia, chewing gum, or stick.
How to make pink color with acrylic paints step by step
If you are wondering how to make pink with acrylic paints, we recommend that you follow the following steps:
- Select the red and white paint you want to use for the mix. Try to make them neutral tones to make a standard pink. Later, you can already make different shades.
- On a canvas or the surface, you are going to work on, add a red paint line. Next, add another white paint.
- Mix the two paints with the brush. If the pink is very light (similar to the ivory color), add redder and, if it is too strong, add more white.
If you add a very large amount of white paint and a dark red (close to brown), the pink will turn to more muted tones like off-white. This color will serve to paint walls and decorate rooms more discreetly than if you use intense pink tones.